Features
Simply45® Pass-Through RJ45 Crimp Tool – S45-C100 Features:
Ratcheted
for Full Compression Cycle. A ratcheted crimp tool requires the
installer to complete the full crimping cycle. While some RJ45 brands
are eliminating this feature with their crimp tools, Simply45® knows
that a ratcheted crimp tool is critical to ensuring that the RJ45 pins
are properly seated onto the wire conductors and the pass-through wires
are properly trimmed. A ratcheted crimp tool prevents incomplete plug
termination.
Synchronized Handles = More Force with Less Hand
Effort. The Simply45® Pass-Through RJ45 Crimp Tool S45-C100 uses
synchronized handles that compress together during the crimping cycle.
This synchronization delivers consistent and even force directly to the
plug socket and the wire trimming. The result is a smoother, faster,
and easier crimping process. The Simply45® Pass-Through RJ45 Crimp Tool
S45-C100 provides more leverage than any other RJ45 crimp tool. The tool
handles open up to 4.25" (108mm). This leverage delivers more force
with less hand effort during the crimping cycle. Other RJ45 crimp tools
may work ok when you are crimping Cat5e, but when you start crimping
Cat6 or Cat6a LAN cables, it usually takes both hands squeezing strongly
to complete the crimp cycle. This is because most other RJ45 crimp
tools use only ONE handle to generate the crimping force. The Simply45®
RJ45 Crimp Tool design utilizes BOTH handles working in tandem to
deliver the crimping force with much less effort. Crimping Cat6 cables
with one hand is easy to do. This lowers the hand fatigue especially
when you have many terminations to complete in a day.
Steel
Reinforced for Greater Stability. We wrapped the Simply45® Pass-Through
RJ45 Crimp Tool S45-C100 with reinforced steel to ensure tool stability
during the crimping cycle. When we analyzed other RJ45 crimp tools on
the market we found that tools using various inserts introduced a lot of
instability during the crimping cycle. Over time this instability
causes poorer wire trims and incomplete RJ45 pin setting onto the wire
conductors. Crimp tool stability results in a smoother crimping cycle,
better pin sets, more consistent wire trimming, and greater durability
over time. You can compare this to chefs in the kitchen. They can tell
immediately if they have a good carving knife. They can truly feel the
difference in the weight, the feel, the balance, the stability… compared
to a cheaply made knife from China. That carving knife works smoothly
with less effort. In our industry, the professional installer is the
chef and RJ45 terminations are done in his kitchen. That is why
professional installers should only use the best professional tools for
the best professional results.
Improved Trimming Blade Design. We
discussed above the importance of "Tool Stability? in delivering the
best RJ45 terminations. Learn more about the Importance of Tool
Stability with Pass-Through RJ45 Modular Plugs
The Simply45®
engineers spent considerable time designing a pass-through RJ45 crimp
tool that would deliver consistent flush-to-the-plug wire trimming over
time. The Simply45® Pass-Through RJ45 Crimp Tool S45-C100 incorporates
these engineering designs. These engineering features include: Even
force delivered to the trimming blades by the synchronized crimp tool
handles; a more stable crimping socket; a fixed blade position alignment
requiring no adjustments; a more precise angle with no flexing on the
trimming blade; and a diamond polished hardened steel trimming blade.
The results are more flush and consistent wire trimming over many more
termination cycles.
Wire Alignment Pattern Where You Need It.
Simply45® laser engraves the wire alignment patterns Type A/B right
under the crimping socket. We also list the pattern to match how the
RJ45 modular plug is inserted into the tool. This makes it easy to
provide one last check to be sure the wires are properly aligned inside
the plug before crimping. This was a feature recommended by
professional installers as a final check before crimping the RJ45
modular plug. Eliminates the error of putting the wire alignment upside
down into the plug.
Easy Blade Changing. Dull and worn-out blades
are one of the primary causes for improper wire trimming on
pass-through RJ45 modular plugs. When we talked with professional
installers one of their biggest complaints was the complexity and
time-consuming process to change the trimming blades on some of these
newer designed RJ45 pass-through crimp tools on the market. Not with the
Simply45® Pass-Through RJ45 Crimp Tool S45-C100. We make blade
changing quick and easy to do. 30 seconds is all you need to change the
trimming blade. No adjustments needed. Just one screw and you changed
the trimming blade. Simply45® believes that if you make changing the
trimming blades very easy, installers will change the trimming blades
more often.
